Serving Dublin & surrounding areas

MJ Roofing & More - Logo
Emergency
Get a Quote

Ridge Tile Repairs Dublin

We repair loose and leaking ridge tiles to protect your roofline from wind and water ingress across Dublin.

Fix loose ridge tiles & cracks

Storm damage make-safe

Clear quotes for repairs or upgrades

Call Now
Get a Quote

Signs Your Ridge Tiles Need Repair

Ridge tiles are exposed to the harshest weather. Here’s what to look for:
Visible cracks in ridge mortar
Ridge tiles slightly lifted or misaligned
Pieces of mortar falling to ground
Leaks appearing after wind-driven rain
Rattling or movement in high winds
Damp patches along top of roof in attic
Gaps visible between ridge tiles
Ridge tiles loose to touch
Recurring issues after patch repairs
Birds nesting under loose ridge tiles

What We Fix

Comprehensive ridge tile repair services across Dublin properties.

Re-Bed Loose Ridge Tiles

Secure loose or misaligned ridge tiles properly.

Replace Broken Ridge Tiles

Source matching tiles and replace damaged units.

Repoint Ridge Mortar

Repair cracked or crumbling mortar joints.

Dry Ridge System Checks/Repairs

Inspect and repair modern dry ridge systems.

Secure Ridge Tiles After Storm Damage

Make-safe and repair storm-affected ridges.

Check Caps/Ends & Ridge Unions

Inspect abutments and chimney connections.

Inspect Nearby Tiles/Slates

Check for movement or damage around ridge.

Photo Evidence on Request

Document before, during, and after repairs.

Ridge Repair Options

When ridge tiles become loose or damaged, you have two main repair options depending on your roof’s current system and your budget.

Re-Bedding/Repointing (Traditional)

Traditional ridge tiles are bedded onto the roof using sand-and-cement mortar. Over time, the mortar cracks and loosens due to thermal movement, weathering, and wind stress. Re-bedding involves lifting the ridge tiles, cleaning off old mortar, and re-setting them with fresh mortar mix. This is suitable when the tiles themselves are in good condition and the roof structure is sound.

Re-bedding is a proven, cost-effective repair method for Dublin roofs. However, mortar will eventually crack again — typically after 15–25 years depending on exposure — so it’s a medium-term solution rather than a permanent fix.

Dry Ridge Upgrade/Repair (Modern)

Dry ridge systems use interlocking plastic brackets and clips to secure ridge tiles mechanically — no mortar required. They’re designed to allow roof ventilation while keeping out rain, snow, and birds. Dry ridge systems are becoming the preferred option for new roofs and ridge replacements because they eliminate mortar cracking issues and provide long-term reliability.

If your ridge is due for renewal or you’re experiencing recurring mortar problems, a dry ridge upgrade may be the better long-term investment. We can assess your roof and explain both options clearly. Learn more about dry ridge installation →
We’ll inspect your flat roof and explain both options honestly so you can decide what’s right for your property.

How Our Ridge Tile Repair Process Works

Inspect & Identify Issues

We inspect the ridge tiles from ground level and, where safe, from the roof. We check for loose tiles, cracked mortar, misalignment, storm damage, and signs of water ingress. We also inspect the surrounding roof area for related issues.

Provide Clear Written Quote

After inspection, we explain what's wrong and provide a clear written quote for the repair. We'll outline whether re-bedding, tile replacement, or a dry ridge upgrade is the best option for your roof. Photos are taken for your records.

Repair & Clean Finish

Once approved, we carry out the repair work with proper materials and safety measures. We clean the site, remove debris, and leave your property tidy. All work is done to a high standard with attention to long-term performance.

Storm Damage or Ridge Tiles Moved in High Winds?

Call us for urgent ridge tile repairs in Dublin — we can make-safe and provide quotes for permanent repairs.
Call Now
Request Call-Back

Recent Ridge Tile Repairs

Dublin roof repair service

Ridge Re-Bedding — North Dublin

Loose ridge tiles re-bedded with fresh mortar after storm damage. All tiles secured and tested. Attic damp resolved.
New Roof Installation or Repairs Dublin

Ridge Tile Replacement — Swords

Several cracked ridge tiles replaced with matching units. Mortar repointed. Long-term watertight finish achieved.
Home Roof Repairs Dublin

Dry Ridge Upgrade — South Dublin

Old mortar ridge replaced with modern dry ridge system. Ventilation improved, no more mortar cracks. Client very satisfied.
It seems we can’t find what you’re looking for.

Areas We Cover

We provide ridge tile repair services across Dublin and surrounding areas, including Dublin City, North Dublin, South Dublin, Swords, Malahide, Portmarnock, Lucan, Tallaght, Dundrum, Blackrock and nearby areas.

Not listed? Call us — we likely cover your area.

Frequently Asked Questions

Are loose ridge tiles dangerous?
Yes, loose ridge tiles can be dangerous for several reasons. First, they can fall from height during high winds, posing a risk to people, vehicles, or property below. Even a single ridge tile falling from a two-storey house can cause serious injury or damage. Second, loose ridge tiles allow water and wind to enter the roof space, leading to internal damp, rot, and structural damage over time. Third, gaps under loose ridge tiles let birds and vermin nest in the roof space, creating further problems. If you notice loose or rattling ridge tiles, it’s important to get them repaired promptly — both for safety and to prevent water damage. We can make-safe storm-damaged ridges and provide quotes for permanent repairs.
Yes, ridge tile issues are a common cause of roof leaks, particularly along the top of the roof and in the attic space. When ridge mortar cracks or tiles become loose, wind-driven rain can be forced under the ridge tiles and into the roof. This often appears as damp patches along the ceiling line, in the attic near the ridge, or running down internal walls. Ridge leaks can be difficult to diagnose because water enters at the ridge but travels along roof timbers before appearing elsewhere. If you have damp in the upper part of your house — especially after heavy or windy rain — the ridge is a likely culprit. We inspect ridge tiles as part of leak investigations and can trace the water path to confirm the source.
Yes, ridge tile repairs are almost always carried out independently of the main roof. Unless the roof covering itself is failing or at end-of-life, ridge repairs don’t require re-roofing. We can re-bed loose tiles, replace broken units, repoint mortar, or upgrade to a dry ridge system without disturbing the slates or tiles on the main roof slopes. Ridge repairs are a localised job — we work along the apex of the roof, not the entire surface. Only in rare cases where the roof structure is sagging or the battens are rotten would we recommend more extensive work. We’ll always inspect the ridge and surrounding roof honestly and explain whether a simple ridge repair is sufficient or if other issues need addressing.
Yes, we recommend dry ridge systems for ridge replacements and upgrades, particularly if you’re experiencing recurring mortar problems or planning long-term roof maintenance. Dry ridge systems eliminate the cracking and loosening issues associated with mortar by using mechanical fixings and interlocking plastic components. They provide reliable ridge security, roof ventilation, and weather protection without the need for re-pointing every 15–20 years. Dry ridge systems are now standard on new builds and are increasingly popular for re-roofing and ridge renewal projects. That said, traditional mortar re-bedding is still a valid, cost-effective option for ridge repairs when the tiles are in good condition and the roof structure is sound. We’ll explain both options and recommend what’s best for your property and budget.
We aim to respond as quickly as possible for ridge tile repairs in Dublin. For urgent issues — such as storm-damaged ridges, loose tiles after high winds, or active leaks causing internal damp — we can often attend the same day or within 24 hours to make-safe and assess the damage. For non-urgent ridge inspections or planned repairs, we can usually attend within 1–3 days depending on our workload and your location. If you have loose or rattling ridge tiles, don’t wait for them to fall or for leaks to worsen — call us and we’ll prioritise your call-out. Where possible, we’ll carry out temporary repairs during the initial visit to prevent further damage while we prepare a quote for permanent repairs.
Yes, always. After inspecting the ridge tiles and identifying the issues, we take photos showing the damage, loose tiles, cracked mortar, or storm damage. These photos are useful for your records, insurance claims if applicable, or landlord documentation. We then provide a clear written quote that explains the repair work needed, materials to be used, and the cost breakdown. If temporary make-safe work is carried out during the initial visit, we document that too. Everything is explained upfront before we proceed with permanent repairs — no hidden extras, no surprises, no pressure. You’ll know exactly what you’re paying for and why the work is necessary.
Yes, we carry full public liability insurance for all roofing work, including ridge tile repairs, re-bedding, and dry ridge installation. This protects your property and covers our team while working at height. Ridge work requires safe access, proper ladders or scaffolding, and adherence to health and safety procedures — all of which we take seriously on every job, whether it’s a small ridge patch or a full ridge replacement. You can ask to see our insurance documentation at any time. We’re experienced in working safely on Dublin roofs of all types and heights, from single-storey extensions to two-storey houses and commercial properties.

Yes, when we’re inspecting or repairing ridge tiles, we also check the surrounding roof area for related issues. Loose ridge tiles are sometimes caused by movement or problems elsewhere on the roof — such as slipped slates, cracked tiles, or issues with hip tiles or valleys. We take a holistic approach: if we’re up on your roof to fix the ridge, we’ll inspect the nearby roof covering, flashings, and drainage to ensure there are no other problems that might contribute to leaks or future damage. If we spot additional issues, we’ll explain them clearly and provide a separate quote if needed. Our goal is to ensure your roof is properly watertight, not just patch one area and ignore other problems.

Scroll to Top